Standard Features

• Operates from 115 Volt AC or 230 Volt AC line, selectable with plug-in jumper.
• Switchable output for 0-90 Volt DC or 0-180 Volt DC.
• Back EMF feedback maintains better than 2% speed regulation.
• Dip switches to easily calibrate control for different motor sizes.
• Two diagnostic LEDs indicate when power is on and when current output is at limit set by TORQ pot.
• Six on-board user-adjustable pots for torque limit, minimum speed limit, maximum speed limit, acceleration time, deceleration time and speed regulation.
• Speed can be adjusted manually using a remote 10K speed pot (included with control).
• Unfiltered drive draws lower AC line current than comparable SCR filtered controls.
• Connections for optional user-supplied inhibit switch.

Application Information

• Rated for continuous operation in 50° C ambient with no additional heat sink.
• Drives Bodine 130V and 180V permanent magnet DC motors.
• Drives 90V and 180V "SCR rated" and 130V "PWM rated" permanent magnet DC motors made by other manufacturers.
• Connections made to model 0865 with 0.25" quick connect tabs. Seven mating terminals supplied with control. Connections made to model 0866 with pluggable terminal block (supplied with control).

Optional Accessories

• Analog interface board and isolation module model 3984.