Standard Features

• Operates from 115 Volt AC line.
• Line voltage compensation minimizes speed drift.
• NEMA 1 enclosure for environmental protection.
• Back EMF feedback maintains better than 2% speed regulation.
• Dip switches to easily calibrate control for different motor sizes.
• Two diagnostic LEDs indicate when power is on and when current output is at limit set by TORQ pot.
• Trim pots on PC board to adjust torque limit, minimum speed limit, maximum speed limit, acceleration time, deceleration time, and speed regulation.
• Speed can be adjusted manually using speed pot mounted on enclosure.
• Terminal block inside enclosure for quick motor connection.
  Fuse holder for line on front panel.
• Toggle switch on enclosure to turn AC power on/off.
• Lamp on enclosure indicates AC power on.
• Factory installed AC line cord.
• Unfiltered drive draws lower AC line current than comparable SCR filtered controls.
• Connections for optional user-supplied inhibit switch.

Application Information

• Rated for continuous operation in 40° ambient with no additional heat sink.
• Drives Bodine 130V Permanent Magnet DC Motors.
• Drives 90V "SCR duty" and 130V "PWM duty" permanent magnet DC motors made by other manufacturers.