Model Number

• Kit is designed for quick and easy installation to accessory ready models.
• Incremental encoder output may be used for speed verification or readout.
• 5 VDC, 135 mA input, TTL/CMOS compatible, 20 mA sink output.
• Quadrature, 2 channel output, with 1 index pulse per revolution.
• Encoder cable is 24 inches long, terminated with AMP 103650-7 connector.
  

This accessory can be used with the following models:

33A Series Permanent Magnet DC Motor
6434, 6435, N6415, N6416, N6419, N6420, N6422, N6424

42A Series Permanent Magnet DC Motor
4435, N4031, N4421, N4422, N4430, N4432, N4437, N4800, N4802

33A-Z Series Parallel Shaft DC Gearmotor
N6565, N6566, N6567, N6568, N6569, N6965, N6966, N6967, N6968, N6969

33A-W Series Parallel Shaft DC Gearmotor
6652, N6546, N6547, N6548, N6549, N6550, N6551, N6552, N6553, N6554, N6555, N6556, N6946, N6947, N6948, N6949, N6950, N6951, N6952, N6953, N6954, N6955, N6956

42A-E and 42A-F Series Parallel Shaft DC Gearmotor
4580, 4583, 4585, N4573, N4574, N4575, N4576, N4578, N4579, N4581, N4582, N4584, N4973, N4974, N4975, N4976, N4978, N4979, N4980, N4981, N4982, N4983, N4984, N4985

33A-5F and 33A-5N Series DC Right Angle Gearmotor
6535, 6542, N6540, N6541, N6544, N6820, N6822, N6824, N6825, N6835

42A-5N Series DC Right Angle Gearmotor
4535, N4534, N4536, N4537, N4538, N4834, N4835, N4836, N4837, N4838

42A-5H Series DC Right Angle Gearmotor
4199, 4830, N4500, N4501, N4502, N4503, N4594, N4596, N4598, N4599, N4826, N4827, N4828, N4829, N4831, N4832, N4833

42A-GB Series DC Right Angle Gearmotor
N4460, N4462, N4464, N4466, N4860, N4862, N4864, N4866

33A-E and 33A-F Series Parallel Shaft DC Gearmotor
6580, 6583, 6585, N6573, N6578, N6579, N6584, N6973, N6978, N6979, N6980, N6984, N6985, N6991

33A-5H Series DC Right Angle Gearmotor
6594