 |
 |
 |
>
Home > Products
> Bodine Products > Brushless
DC Accessories
Accessories
for
Brushless
DC Motors and Controls
| Motor
and Gearmotor "L" Brackets |
| Model
No. |
Description |
lbs. |
Dimensions |
Deflection
lbs. |
|
Kit
for "E" and "F" gearmotors |
2.5 |
|
200 |
|
Kit
for "W" gearmotors |
1.75 |
|
125 |
|
Kit
for 34B motors |
1 |
|
25 |
|
22B-D,
22B-Z Gearmotors |
1.25 |
|
50 |
| Most
parallel shaft stock gearmotors have a breather hole on top
and require that the driveshaft remain at 12 o'clock position
with respect to the horizon. |
| Model
No. |
Description |
lbs. |
Dimensions |
|
Base
plate kit for
3F gearmotors |
.5 |
|
| Model
0993 Aluminum Adaptor
Plate |
|
Model
0993 adaptor plates are designed to attach accessories requiring
a mounting bolt pattern or machining other than that provided
on motors and gearmotors with accessory ready shaft extensions.
These plates may be modified with either a lathe or drill
press. IP-44 protection is maintained when using this adaptor
plate, as it is not necessary to disassemble the motor or
gearmotor. |
Model
No. |
Renco
Number |
Resolution
(Pulses per
Revolution) |
Fits
Permanent
Magnet Bodine
Types |
|
RM15D-360-1/4-G6-5CA24-LD-1-C4 |
360 |
24B,
34B |
- Kits
are designed for quick and easy installation to accessory
ready models.
- Incremental
encoder output may be used for speed verification or motion
control.
- 5
VDC, 135 mA input, TTL/CMOS compatible, 20 mA sink output.
- Quadrature,
2 channel output, with 1 index pulse per revolution.
- Encoder
cable is 24 inches long, terminated with AMP 103650-7
connector.
- 1.50
inches in diameter, 0.82 inches long.
|
| 115V
Brushless Control Accessories |
Item
|
Model
No. |
Description |
A |
|
Connection
Cable Assembly for connecting model 3910, 3921 and
3911 controls to stock 130 V motors. One end of the cable
is equipped with a circular connector, the other end is equipped
with quick disconnects for phase leads, and a molded connector
for the commutation leads.
Length: 6 feet. |
B |
|
Extension
Cable for model 3910, 3911, 3921 and 3912 controls.
Extends the cable between the motor and control by six feet.
Both ends are equipped with circular connections for easy
connection between model 3983 cable assembly or encased control
and the motor.
Length: six feet. |
C |
|
Analog
Interface and Isolation Module for model 3910, 3911,3921
and 3912 controls. Provides Analog interface and isolates
controls from system controller input signals which may be
at different potentials. |
- |
|
Fuse
and Speed Potentiometer Kit (not shown) for use with
model 3910 control. Contains potentiometer for manually regulating
motor speed and an assortment of fuses to cover the range
of motors and gearmotors which can be used with the control. |
- |
|
Enclosure
Sealing Kit (not shown) seals the model 3912 or model
N3913 enclosure to provide IP-44 splash-proof protection. |
| 
|
|
|
| |
|
|
|
|
|
TOLL
FREE PHONE: 800-257-8240 FAX:
800-976-7357
|
home - products
- services - about
us - contact - site
map
|
