Jos. T. Fewkes & Co.
Bodine Distributor for over 45 years

> Home > Products > Bodine Products > Brushess DC Electrical Connections

Brushless DC Motors
Electrical Connections

Wiring Harness for 24 Volt Motors and Gearmotors
Bodine 24 Volt motors and gearmotors have four 18 AWG wires and a five-conductor shielded cable for connection to a Bodine 24 Volt control. The three motor phase connections are made with .250” quick connect receptacles. The ground lead is terminated with a ring terminal and the 24 AWG commutation leads inside the 5-conductor shielded cable are terminated in a 6-pin in-line connector with 0.1” center distances. The harness is a nominal 24” long from the motor housing to the end of the connections.
Pin
Location
Wire
Color & Size
Pin
Part No.
Connector
Part No.
Function
-
Red,
18 AWG
-
AMP 640902-1
Phase B
-
Brown,
18 AWG
-
AMP 640902-1
Phase A
-
Orange,
18 AWG
-
AMP 640902-1
Phase C
-
Green/Yellow,
18 AWG
-
AMP 640204-1
Earth /Ground
1
Drain Wire
MOLEX
08-50-0113
MOLEX
22-01-3067
Shield Drain
2
Black,
24 AWG
MOLEX
08-50-0113
Sensor
Common
3
Green,
24 AWG
MOLEX
08-50-0113
Hall C
4
White,
24 AWG
MOLEX
08-50-0113
Hall B
5
Brown,
24 AWG
MOLEX
08-50-0113
Hall A
6
Red,
24 AWG
MOLEX
08-50-0113
Sensor
Power
Wiring Harness for 24 Volt Motors and Gearmotors (34B shown)


Wiring Harness for 130 Volt Motors and Gearmotors
Bodine 130 Volt motors and gearmotors have a single 14-pin plug & twist connector at the end of a nominal 12” long harness. This provides a quick and easy means of connecting the motor or gearmotor to a Bodine 115 VAC control. An interface cable is needed between the motor and the control. This cable may be supplied by the customer or it can be purchased from Bodine Electric. Model 3983 is a 6’ long cable that can be used to connect 130 Volt motors and gearmotors to Bodine control models 3910, 3911, and 3921. Model 3982 is a 6’ long cable that can be used to connect 130 Volt motors and gearmotors to Bodine control model 3912. It can also be used as an extension cable for use with any of the above mentioned controls. Encased model 3912 includes a 6' cable.
Pin
Location
Wire
Color & Size
Pin
Part No.
Connector
Part No.
Function
2
Red,
18 AWG
AMP 66098-7
AMP
206044-1
Phase B
1
Brown,
18 AWG
AMP 66098-7
Phase A
3
Orange,
18 AWG
AMP 66098-7
Phase C
4
Green/Yellow,
18 AWG
AMP 66098-7
Earth /Ground
11
Drain Wire
AMP 66102-7
Shield Drain
10
Black,
24 AWG
AMP 66102-7
Sensor
Common
14
Green,
24 AWG
AMP 66102-7
Hall C
13
White,
24 AWG
AMP 66102-7
Hall B
12
Brown,
24 AWG
AMP 66102-7
Hall A
9
Red,
24 AWG
AMP 66102-7
Sensor
Power
Wiring Harness for 130 Volt Motors and Gearmotors (34B shown)

 
   

- Bodine Motors
- GE Motors
- GE Drives
- GE GPC
- GE Dist. Equip.
- GE Ind. Control
- GE Parts
- Sale Items
- Quote Request
- Literature Request
- Survey
- Newsletter
- Bodine Line Card
- GE Line Card
- Site Map
- Rep Credit Form


TOLL FREE     PHONE: 800-257-8240     FAX: 800-976-7357

home - products - services - about us - contact - site map