Jos. T. Fewkes & Co.
Bodine Distributor for over 45 years

> Home > Products > Bodine Products > DC Accessories

Accessories for
Permanent Magnet
DC Motors and Controls

Motor and Gearmotor "L" Brackets
Model No. Description lbs. Dimensions Deflection lbs.
Kit for "E" and "F" gearmotors
2.5
200
Kit for "W" gearmotors
1.75
125
Kit for 24A motors
1
25
Kit for 33A motors and 24A-D, 24A-Z, 33A-Z gearmotors
1.25
50
Most parallel shaft stock gearmotors have a breather hole on top and require that the driveshaft remain at 12 o'clock position with respect to the horizon.


Other Motor and Gearmotor Kits
Item Model No. Description lbs. Dimensions
A
Base mounting kit for
3F gearmotors
.5
B
Die cast terminal box kit for 33A, and 42A, motors and gearmotors
1
B
Die cast terminal box kit with terminal block for 33A and 42A motors and gearmotors
1
C
Die cast base kit for 42A motors
.33
D
IP-44 kit for 42A
-
-
E
Adaptor plate kit for E, F and W gearheads provides drop-in replacement of competitive gearmotors.
.5



DC Motor and Gearmotor Brake Kit
Model No. Static Torque (lb-in.) Volt AC Ohms
Weight (oz.)
17.7
115
1067
11
  • Spring applied brake
  • Hex drive with anti-rattle feature
  • Kit includes mounting hardware
  • Kit fits 33A and 42A permanent magnet motors and gearmotors only



Items for Type FPM Controls
Item
Model No.
Accessory Description
-
Analog Interface Board for use with Control Models 0810, 0830, and 0850. Allows control to accept a variable voltage or current signal from user's host controller in order to automatically control motor speed. Inputs are optically isolated.
-
Digital Interface Board for use with Control Models 0810, 0830, and 0850. Allows control to accept 8 parallel TTL signals from user's host controller in order to automatically control motor speed. Inputs are optically isolated.
A
Electronic Direction & Braking Board for use with Control Models 0810, 0830, and 0850. Allows user to change motor direction and to dynamically brake motor to a quick stop. Inputs are not optically isolated.
B
Local/Remote Switch for use with Control Models 0810, 0830, and 0850 when used with Accessory Models 0888 and 0889. Allows user to switch between automatic and manual operation.
-
Sealing Kit for use with any type FPM encased control in order to upgrade standard NEMA 12 enclosure for IP-44 rating.
C
Analog interface and isolation module model 3984 provides Analog interface and isolates controls from system controller input signals which may be at different potentials.



Encoder Kits
Model No.
Renco Number
Resolution
(Pulses per
Revolution)
 Fits Permanent
Magnet Bodine
Types
RM15D-360-1/4-G6-5CA24-LD-1-C4
360
24A
RM-15D-360-3/8-G6-5CA24-LD-1-H4
360
33A, 42A
  • Kits are designed for quick and easy installation to accessory ready models.
  • Incremental encoder output may be used for speed verification or readout.
  • 5 VDC, 135 mA input, TTL/CMOS compatible, 20 mA sink output.
  • Quadrature, 2 channel output, with 1 index pulse per revolution.
  • Encoder cable is 24 inches long, terminated with AMP 103650-7 connector.
  • 1.50 inches in diameter, 0.82 inches long.



Brake, Encoder, and Tachometer (B.E.T.) Ready Models
Model 0992 adaptor plate is designed to attach accessories requiring a mounting bolt pattern or machining other than that provided on motors and gearmotors with accessory ready shaft extensions. These plates may be modified with either a lathe or drill press. IP-44 protection is maintained when using this adaptor plate. It is not necessary to disassemble the motor or gearmotor.

 
   

- Bodine Motors
- GE Motors
- GE Drives
- GE GPC
- GE Dist. Equip.
- GE Ind. Control
- GE Parts
- Sale Items
- Quote Request
- Literature Request
- Survey
- Newsletter
- Bodine Line Card
- GE Line Card
- Site Map
- Rep Credit Form


TOLL FREE     PHONE: 800-257-8240     FAX: 800-976-7357

home - products - services - about us - contact - site map