|
AISE and NEMA Rated—IC9528
600
Volts Max
Where
to use
Use
as holding, stopping, or retarding brake on cranes, hoists,
conveyors, movable bridges, rolling-mill drives and other
machinery. The brake responds quickly to prevent the load
from drifting or coasting after power is cut off.
The
IC9528 brake is a two-shoe, spring-set brake operating
on a wheel mounted on the shaft of a motor or other machinery.
When energized, a dc magnet picks up against spring pressure
to effect release. When deenergized, the magnet drops
out and the brake is set by the operating spring. The
IC9528 brakes now incorporate non-asbestos brake linings.
IC9528
brakes meet AISE and NEMA standards for shoe brakes. They
are designed for use in a 40 C ambient.
The
C and E forms provide for additional torque capacity through
increased lining area.
| FEATURES |
|
1.
Single-end Adjustment
Simple
agjustment for (A) lining wear, and (B) torque setting.
|
2.
Enclosed Terminal Box
Totally
enclosed conduit box for terminating coil leads.
|
3.
Epoxy-encapsulated Coils
Dirt, moisture, and oil are sealed out. |
4.
Manual-release Mechanism
Permits removal of wheel or replacing brake
linings without adjustment of torque setting. |
5.
Armature-gap Indicator
Clearly visible indicator shows when to
adjust for lining wear. |
6.
High-Strength Ductile-iron Wheel
Material
chosen for high tensile strength and wear-resistant
qualities. Wheel is removable vertically to speed
motor servicing. By simply pivoting the tie rod
on the 30-inch brake, the wheel can be removed vertically. |
7.
Non Asbestos Bonded Lining
No need to remove shoe assembly to replace
lining. Simply utilize manual-release mechanism,
remove lining-retaining bolts and slip lining out
with screwdriver. Lining is non asbestos material
bonded to steel backing. |
8.
Self-lubricated Bearings
Self-lubricated
bearings with stainless steel pins. |
9.
Self-cleaning Armature (cut-away)
Cut-away design allows dirt to fall through
rather than collect in armature gap. |
9A.
Self-cleaning Armature (top-pivot)
Top-pivot
design allows dirt to fall through rather than collect
in armature gap. |
10.
Shoe-clearance Locking
Positions
pivot arm to provide positive shoe clearance. |
11.
Complete Magnet Interchangeability
The
complete magnet housing with its coil is readily
interchanged. Can be removed vertically if desired. |
For
more information on these brakes, please click here,
to view pages 2 through 8 in section 1 of the GE
Industrial Control Rainbow Catalog for application
information, dimensions, outline drawings and how
to order.
If
you have any further questions, please e-mail our
sales dept at sales@jostfewkes.com
or utilize our Quotation
Request Form. |
|
