Standard Features

• Operates off 115 Volt AC line.
• Filtered DC output for cooler motor operation, longer brush life, lower audible noise, and wider speed range.
• Dip switches to easily calibrate control for different motor sizes.
• Line voltage and temperature compensation minimize speed drift.
• Trim pots on PC board to adjust torque limit, minimum speed limit, maximum speed limit, acceleration time, and speed regulation.
• Back EMF feedback maintains better than 2% speed regulation.
• 10k ohm remote speed pot and 24" connecting wire supplied with each control.
• Connections for optional user-supplied inhibit switch.
• Terminal block for quick line and motor connection.
• Plug-in connector for speed pot and optional usersupplied inhibit switch.
• Flexibility in adding plug-in interface boards. See optional accessories.
• Built-in line and motor fuseholders (both fuses supplied).

Application Information

• Rated for continuous operation in 50° C ambient with no additional heat sink.
• Designed to be mounted in separate enclosure supplied by user.
• Drives Bodine 130 Volt permanent magnet DC motors.
• Drives 90 Volt "SCR duty" and 130 Volt "PWM duty" permanent magnet DC motors made by other manufacturers.

Optional Accessories

• Analog interface board model 0888.
• Digital Interface Board model 0889.
• Electronic Direction and Braking Board model 0890.
• Local/Remote Switch Kit model 0893.